How To Choose The Right Resin Hand Polishing Sheets

Hard Materials: For hard materials, select coarser grits (such as 60-100#) for initial polishing. Coarse grits are ideal for removing surface imperfections and rough areas. After that, use finer grits (200-400#) for fine polishing to achieve a smooth, glossy finish.

Soft Materials : For softer materials, start with finer grits (400# and above) to avoid excessive wear or scratching of the surface.

Coarse Grit : Ideal for removing larger imperfections, scratches, or rough sections of the surface. This is commonly used in the initial polishing stage.

Medium Grit : Suitable for refining the surface and removing finer scratches. It's often used after the initial polishing to further smooth the surface.

Fine Grit : Used for the final polishing stage to achieve a smooth and glossy surface. This grit is essential for high-gloss finishes and is typically used in the final stage of polishing

Initial Refining: Use coarse grit resin hand polishing paper to remove larger imperfections and rough areas.

Intermediate Refining: Medium grit is used for further surface smoothing, removing small scratches left from earlier stages.

Final Polishing: Fine grit polishing paper should be used for the final stage, providing the smooth, glossy finish.

Hand Polishing: For hand polishing, choose flexible polishing paper that can be easily maneuvered over irregular surfaces. Finer grit is preferable for achieving precise polishing by hand.

Machine Polishing: For machine polishing, opt for durable polishing paper that can withstand extended use. Choose the appropriate grit based on the workload and avoid excessive wear on the paper.

For a high-gloss finish, choose fine grit resin hand polishing paper. This will ensure a smoother and shinier surface.

If only surface refining is needed, choose coarser grit to efficiently remove imperfections, but without focusing on achieving gloss.